Shopping Notice :

We know you have a world full of choices, thank you for choosing us !

Before order

Kindly note, our remote is the COMPATIBLE / REPLACEMENT/COPY /CLONE remote, not the original one.

Please make sure your original remote control can be used before buying.

As a general guide, if the remote you currently use is one of the remotes pictured in the ad then this remote will be copy with your remote.

If you are not so sure, please contact us without hesitate.

Please pay attention that customs tax should be paid by buyer, seller can’t support any customs tax.

Charges may be due to different national policies. Please understanding it.

Description:

1. Type of programming: Programming with the receiver
2. Number of channels: 4
3.Material: ABS
4.Frequency range:27-40MHz
5.Code: Fixed code
6.Battery: 12V 23A
7.Color:Blue
8.Transmission distance: 50-100m (Open area)

Usage: garage door, alarm, automatic door, rolling door, etc.

How to Program:

1) .Press and retain pressing Button 1 and at the same time press 4 times Button 2

2). Release both buttons. So LED will emit a quick flash every 2 secs.

3). Place the original remote control on the opposite of (see Figure 1.).

4). Press and retain the button to copy the original remote control and wait utill the LED of changes the way to flash (faster), it means that the code has been learnt. This may take a few seconds.

5) .While the LED flashes, press button where you want to store the code just copied, until the LED switches off.

NOTES:

If the procedure is not successful or some errors occur, please wait for seconds and start the procedure again from point 1.

memory is completely rewritable.

To program the other channels of , repeat the same procedure from the beginning (point 1)

Include:

1 x Remote Control
1 x Battery
1 x Key chain
1 x English Manual